Home Renovation Blog

Homeowners always have a lot of questions when it comes to home renovations. What are the latest trends? How do I find the right contractor? How much will it cost?

RenosGroup’s home renovation blog is the go-to source for all your renovation needs. We provide tips, tricks, and advice from the experts to help you make your renovation project a success. From start to finish, we’ve got you covered.

Whether you’re looking to update your kitchen, restore your bathroom, or add an addition to your home, the RenosGroup blog has the information you need to get the job done right. We’ll help you save time and money while ensuring that your renovation project is a beautiful and stress-free experience. Let us help you turn your house into the home of your dreams.  Don’t hesitate to contact us (613)727-9427 should you have any questions

A Look at the Top Kitchen Renovator Ottawa Has to Offer

If you’re considering a kitchen renovation, you want to make sure you hire the best company for the job. There are a lot of so-called “experts” out there, but how do you know who to trust? In this blog post, we’ll take a look at the top kitchen renovator Ottawa has and see what sets them apart from the rest.

There are a few things you should consider when hiring a kitchen renovator. First and foremost, you want to make sure they have a good reputation. You can check online reviews or ask for recommendations from friends and family. Once you’ve found a few companies that come highly recommended, it’s time to get some estimates. The estimate should be based on the scope of work that needs to be done, as well as the materials needed and the timeline for completion.

Once you’ve chosen a company, it’s important to communicate your vision clearly. Make sure you discuss your budget and any potential time constraints upfront. The last thing you want is for your dream kitchen to end up being a nightmare because of miscommunication between you and your contractor.

If you’re looking for the top kitchen renovator Ottawa has, look no further than RenosGroup. We have over 25 years of experience in the industry and our team of experts will work closely with you to make your dream kitchen a reality.

If you’re planning a kitchen renovation, it’s important to hire a reputable company who will work with you to create the kitchen of your dreams. RenosGroup is the top kitchen renovator Ottawa has and we would love to help turn your vision into reality. Contact us today for a free consultation!  Don’t wait, contact us today (613)727-9427

How to Choose a Kitchen Renovator in Ottawa

If you’re considering renovating your kitchen, you might feel a little overwhelmed. There are so many things to consider! What style do you want? What materials should you use? And, most importantly, who should you hire to do the work?

In this blog post, we’ll focus on the last question. How can you choose a kitchen renovator in Ottawa who will do a great job? Keep reading to find out!

1. Get Recommendations from Family and Friends


When it comes to finding a reputable contractor, word-of-mouth recommendations are always best. Talk to your friends and family members who have recently renovated their kitchens and see if they have any recommendations. Once you’ve compiled a list of potential candidates, you can start doing your own research.

2. Look for Online Reviews


These days, it’s easy to find reviews for just about anything online. A quick Google search will reveal what other customers have said about a particular company. Reading reviews can give you a good sense of what it’s like to work with a particular contractor. But don’t just take everything at face value—look for patterns in the reviews. If most of them are positive but there are a few negatives ones mixed in, that’s probably not cause for alarm. But if all the reviews are negative, you might want to steer clear.

3. Check for Proper Licensing and Insurance


Any reputable contractor should be properly licensed and insured. Ask to see proof of both before you sign any contracts. This will protect you in case anything goes wrong during the renovation process.

4. Make Sure They’re Experienced


When it comes to something as important as your kitchen, you want to make sure it’s in good hands. Ask potential contractors how long they’ve been in business and how many kitchens they’ve renovated. Then, ask to see some photos of previous projects. This will give you a good sense of their workmanship and style.

5. Get Everything in Writing


Before any work begins, make sure you have a detailed contract that outlines the scope of work, materials to be used, timelines, and payment arrangements. This will protect both you and the contractor in case there are any misunderstandings down the road.

Renovating your kitchen is a big undertaking—but it doesn’t have to be stressful! By taking the time to choose a reputable contractor, you can rest assured knowing that your kitchen is in good hands. Follow the tips outlined above and you’re sure to find a kitchen renovator in Ottawa who meets all your needs!  Don’t wait to reach out for a free in-home consultation or give us a call at (613) 727-9427.

Home Renovation Company Reviews: Why They Matter

You’re probably familiar with online reviews for restaurants, hotels, and other businesses. But what about home renovation companies? Online company reviews are important for any business, but they can be especially valuable for small businesses in our industry. Here’s why home renovation company reviews are so important:

1. Provide social proof.
2. Helps attract new customers.
3. Gives valuable feedback.
4. Improve search engine ranking.

Keep reading to learn more…

1. Online Company Reviews Provide Social Proof


Social proof is the idea that people are more likely to do something if they see that others are doing it too. In other words, it’s validation from our peers that something is worth our time and attention. When it comes to home renovations, potential customers want to see that others have had a positive experience working with a business before they’ll commit to hiring.

That’s where online company reviews come in. A potential customer who sees that a business has mostly positive online reviews is more likely to trust that business than one whose reviews are all over the place or, worse, non-existent.

What’s more, social proof is especially important for small businesses because they don’t have the same kind of name recognition as a big-box store or a national brand. They have to work a little harder (okay, a lot harder) to prove that they’re worth the prospective customers’ time and money.

2. Online Company Reviews Help Attract New Customers


In addition to providing social proof, online company reviews can also help attract new customers—especially if effort to respond to every review (more on that later) is made. Positivity breeds positivity, and when potential customers see that a company is responsive to customer feedback—both positive and negative—they’ll be more likely to do business with them instead of with one of their competitors who doesn’t bother responding at all. Another way that online company reviews help attract new customers is by giving the company free marketing content that can be shared on their social media channels and website. By sharing positive reviews on those channels, their increasing the visibility of their business and putting themselves in front of potential customers who might not have otherwise heard of them—all without spending a dime!

3. Online Company Reviews Give Valuable Feedback


In addition to helping you attract new customers, online company reviews also give valuable feedback that can be used to improve their business. Even if a review is mostly positive, there’s usually at least one constructive criticism included that can be used to make their business even better. For example, if a customer says they loved their kitchen renovation but wished the project had been completed sooner, they know that timelines are something they need to focus on in future projects. Of course, no business is perfect, so it’s also important not to take negative reviews too personally—use them as an opportunity to learn and grow!

4. Online Company Reviews Improve The Company’s Search Engine Ranking


Last but not least, online company reviews can also help improve search engine rankings—which means more people will see their website when they’re searching for home renovation companies in their area. How does this work? Well, when potential customers search for home renovation companies and see a business listed near the top of the results page, they’re more likely than not going to click on that listing first—after all, who wants to scroll through page after page of search results? Moreover, when Google sees that people are clicking on that listing and staying on your website (aka “dwell time”), they’ll interpret this as a sign that this website is relevant and useful—and will reward that site by moving their listing even higher up the results page next time someone searches for home renovation companies!

As you can see, there are plenty of good reasons why every home renovation company should care about online reviews, they provide social proof , attract new customers , give valuable feedback , and improve your search engine ranking. And there’s no time like the present to start giving those five-star reviews. So reach out today to leave your honest feedback about your experience working with a business on Google , Yelp , Facebook , or wherever else they prefer to leave their reviews will only take a few minutes of their time and could really benefit your business in the long run ! Thanks for reading!  Don’t hesitate to reach out for a free in-home consultation or give us a call at (613)727-9427


Home Renovation Costs on the decline?

Are home renovation costs truly starting to decline?

According to a study done by Remodeling.hw.net, home renovation costs are currently on the decline. This is good news for homeowners who have been wanting to renovate their homes but were put off by the costs. Let’s take a look at what is driving this decline in costs and what types of renovations are being affected the most.

One of the main reasons cited for the decline in home renovation costs is the decrease in labor costs. With more people out of work, there is more competition for jobs, which has driven down wages. This is good news for homeowners who are looking to do large-scale renovations that require a lot of labor hours such as adding an addition or gutting a kitchen.

Another reason for the decline in home renovation costs is the decrease in material costs. With the economy struggling, many manufacturers are offering discounts on construction materials in order to move inventory. This is especially true for high-end materials such as granite countertops and hardwood floors. So if you’ve been wanting to upgrade your home with luxury finishes, now is a great time to do it!

Finally, many contractors are also offering discounts on their services in order to stay busy during these slow times. So if you’ve been considering any type of home renovation, now is a great time to start getting quotes and shopping around for the best deals.

If you’ve been wanting to renovate your home but were afraid of the cost, now is a great time to take advantage of the current market conditions. With labor and material costs on the decline, you can get more bang for your buck when it comes to home renovations. So start planning your project today and enjoy your newly renovated home before everyone else catches on and prices start going back up!  Don’t wait, contact us today (613)727-9427

5 Things to Do Before Starting Any Home Renovation

Planning a home renovation can be an exciting time.  After all, who doesn’t love the idea of coming home to a brand-new kitchen or bathroom? But before you start tearing down walls and selecting fixtures, there are a few things you need to do to set yourself up for success. Here are 5 things to do before starting any home renovation.

1. Set a Budget

One of the first things you need to do before starting any home renovation is to set a budget. This will help you determine what projects you can realistically afford to take on and also help keep costs under control during the renovation process. When setting your budget, be sure to account for both the cost of materials and labor.

2. Choose the Right Contractor

If you’re planning on doing any major renovations, chances are you’re going to need some help from a professional contractor. Choosing the right contractor is crucial to ensuring that your renovation goes smoothly. Be sure to get multiple bids from different contractors and ask each one for references from previous clients. Once you’ve narrowed down your options, be sure to have a detailed contract in place that outlines the scope of work and sets expectations for both parties.

3. Get Your Permits

Depending on the nature and scope of your renovation, you may need to obtain one or more permits from your local municipality before work can begin. Failure to do so could result in costly fines or even stop your renovation in its tracks. If you’re unsure whether or not you need a permit, your contractor should be able to advise you.

4. Prepare Your Home

Once you’ve chosen your contractor and obtained all the necessary permits, it’s time to start preparing your home for the renovation process. This typically includes moves such as clearing out closets and removing carpeting or other flooring. It’s also important to make sure that any furniture or valuables that will remain in the house during the renovation are properly protected from dust and debris.

5 Pick Out Materials

One of the most exciting parts of any home renovation is picking out materials such as flooring, fixtures, cabinets, etc. But before you head out to your local home improvement store, it’s important to do your research and select materials that fit both your budget and style preferences. Once you’ve got an idea of what you want, be sure to get samples so that you can see how they look in person before making any final decisions.

Planning a home renovation can be an exciting time but there are definitely some things you need to do beforehand to set yourself up for success. From setting a budget and choosing the right contractor, to getting permits and picking out materials, following these 5 tips will help ensure that your next home renovation goes off without a hitch!  Why wait, contact us today (613)727-9427

Home Improvements That Pay Off When You Sell

If you’re thinking about selling your home, there are a few things you can do to increase its value and make it more appealing to buyers. By making some strategic home improvements, you can recoup your investment and even turn a profit.

Here are seven home improvements that will help you sell your home for top dollar.


1. Kitchen Remodel – A kitchen remodel is one of the most effective ways to increase your home’s value. A well-designed kitchen with high-end appliances and finishes will appeal to buyers and help you fetch a higher price. Even if you don’t have the budget for a complete gut renovation, making smaller changes like painting the cabinets, installing new countertops, or upgrading the lighting can make a big difference.

 2. Bathroom Remodel – Like the kitchen, bathrooms are another important selling point for potential buyers. A bathroom remodel can be relatively simple and inexpensive, but it will make a big impact on buyers. If your bathroom is outdated or in need of repairs, consider renovating it before putting your home on the market.

 3. Finished basement – A finished basement is a great way to add extra living space to your home without having to build an addition. If your basement is currently unfinished, consider finishing it with drywall, flooring, and lighting fixtures. You could also add a bathroom or wet bar to make it even more appealing to buyers.

 4. Deck or Patio – If your home doesn’t have an outdoor living space, now is the time to create one. Adding a deck or patio is a great way to add extra square footage to your home and make it more enjoyable for entertaining guests. And since many buyers place a premium on homes with outdoor living spaces, you’re likely to see a return on your investment when you sell.

 5. Landscaping – First impressions matter, so make sure your curb appeal is up to par before putting your home on the market. Trimming shrubs, planting flowers, and mowing the lawn are all simple yet effective ways to improve your home’s appearance and boost its value at the same time.

 6. New Windows – Old or drafty windows can be a major turnoff for potential buyers, so replacing them is worth the investment if you’re looking to sell soon. Not only will new windows improve your home’s appearance, but they’ll also provide energy savings that will appeal to cost-conscious buyers.

 7 . Paint Job – A fresh coat of paint is one of the quickest and most affordable ways to freshen up your home before selling it. When selecting paint colors, opt for neutral shades that will appeal to a wide range of buyers. Avoiding bold or unusual colors will help ensure that your home appeals to as many people as possible. 

 Investing in some strategic home improvements before selling your home can be a great way to boost its value and improve its chances of selling quickly. By focusing on projects that will appeal to buyers, you can make sure you see a return on your investment when it’s time to sell.  Don’t wait, contact us today (613)727-9427

Undermount Sink with a Laminate Countertop ?

Undermount sinks have become all the rage in today’s age, as they provide a sleek appearance and are easier to keep clean (no ridge means no opportunity for grease and grime to accumulate). 

Yet, an undermount sink requires a different type of installation than traditional ‘drop-in’ sinks. 

Also, undermount sinks work better with certain materials than others. In particular, solid surface materials work best, as they can support the considerable weight of the sink and your not left with exposed edges of unfinished wood around the sink opening.

Due to their strength and durability, granite, soapstone, and concrete are all perfect countertop material options for undermount sinks. 

But what if you have laminate countertops instead? Will you still be able to install a beautiful undermount sink for your kitchen?

The answer is a bit complicated. While possible, it’s a complex job that you should leave to a finish carpenter experienced in building laminate countertops. 

If you attempt to install an undermount sink into your laminate countertops by yourself, you could end up costing yourself thousands in repairs. 

Read on to learn more about undermount sinks and laminate countertops and how to combine the two successfully. 

What are Undermount Sinks?


In general, there are two types of sinks used in kitchens and bathrooms – drop-in sinks and undermount sinks. 

The primary difference lies in the installation method. 

Drop-in sinks get installed by cutting a hole on top of the counter and dropping the sink in, hence the name. 

Undermount sinks, on the other hand, get installed beneath the countertop and are held in place by an extra-strong adhesive and special mounting brackets. For this reason, it’s critical for the material to be robust enough to support the weight of the sink without causing issues. 

For an undermount, the sink installs flush into the countertop, not below or above. While this provides a stylish look that’s also easier to clean – it’s what can cause problems with weaker materials, such as laminate countertops. 

Strength and stability aren’t the only issues laminate countertops have with undermount sinks, either. 

Laminate countertops contain MDF (medium-density fibreboard) underneath, which is extremely sensitive to moisture. If the MDF gets wet, it will ruin your countertops due to warping (foiling your ability to install an undermount sink in the future, too). 

So if you’re going to install an undermount sink on a laminate countertop in your kitchen or bathroom, you need to make doubly sure that no moisture can seep through into the MDF.

Why are Undermount Sinks Popular?


In the past, down-in sinks were virtually everywhere due to their versatility and ease of installation. 

However, undermount sinks have taken over in recent years due to a variety of attractive benefits they yield to homeowners, including:

  • A superior sense of style. Undermount sinks provide a sleek, streamlined look that’s more modernized than a down-in sink. Many homeowners desire undermount sinks for the visual appeal alone.
  • They’re more hygienic. Drop-in sinks have the unique disadvantage of having silicone bead seals around the edges. Not only are these unsightly, but they’re breeding grounds for bacteria, as they’re notorious for accumulating grease, grime, and dirt. An undermount sink has no such seal, so they’re a far more hygienic option.
  • Clean-up is a breeze. This plays off the previous benefit. Since there’s no seal around the edge, there’s nothing for water/food remaining to get caught on. As such, you can clean your countertops by funneling everything directly into your sink.
  • They add counter space. A drop-in sink will take up more counter space, limiting the area where you can prepare food and store appliances. Undermount sinks are far more compact, so you’ll enjoy more counter space as a result.
  • You can install the faucet anywhere. On a drop-in sink, the faucet can only go in one spot – in the sink basin. With an undermount sink, you’ll experience full faucet freedom. You can choose to install it on the wall, behind the bowl, to the side, or wherever else you please. 

Those are the main reasons why undermount sinks have dramatically risen in popularity in recent years. 

Laminate Countertop Concerns


As previously stated, laminate is a weaker material

Undermount sink with laminate countertop

Undermount sink with laminate countertop

than granite or marble – which is why it has trouble supporting an undermount sink. 

So does that mean there’s no hope for laminate countertop owners with their hearts set on undermount sinks?

Not at all, just that there are a few extra steps involved in the process (which will likely require homeowners to rethink their budget). 

We can’t stress enough that a complicated job like this is best left to professional contractors like us. Attempting to build your own laminate countertops or install a sink with mounting brackets and glue can end in disaster. 

For instance, if you get the particle board wet, it can warp your countertops and ruin them forever. 

Concluding Thoughts: Undermount Sink With Laminate Countertops


In summary, installing an undermount sink on laminate countertops is possible. 

While laminate is far from the ideal material to use, it’s still doable with custom laminate countertops and a thin, utterly flat sink.

We’ll be completely transparent…. In many cases, it will be more work and cost than it may be worth for you. If properly installing an undermount sink on your laminate countertops is out of your budget, we can recommend looking for good deals on leftover stone countertop pieces and using a standard unmount sink of your choice. Feel free to contact us or call us at 613-727-9427 for a free in-home consultation on your next renovation in Ottawa

Gallery of manufacturer’s pictures

Website:  Karran.com

Link to video on how a stainless steel sink is installed under laminate countertop
Link to video on how a solid surface (acrylic) sink is install under laminate countertop

Water Damage in Ottawa? Your Essential Guide to Repair

Did your home incur significant water damage in Ottawa? If so, it’s crucial to act fast – as wet surfaces and materials start to form mold and other severe issues after only 24 hours. 

As such, you’ll want to assess your damages and begin repairs as soon as possible. 

If the damage is severe and beyond your scope, don’t hesitate to call our highly trained and experienced team at 613-727-9427, and we’ll hop on your repairs immediately. 

If the damage is minimal, you may want to know if you can handle the repairs yourself. 

In that case, you’ve come to the right place – as we’ve prepared an extensive guide to repair water damage in Ottawa.  

Even if you haven’t experienced water damage in your home, it’s still beneficial to know how to deal with it properly should it occur. 

There’s quite a bit to know about water damage, and making the wrong move could spell disaster. Conversely, making the right decisions early on will go a long way toward restoring your home to its original state at a reasonable cost. 

Read on to learn the best practices involved with proper water damage repair. Along the way, we’ll cover:

  • The three different types of water damage
  • Mold inspection tips
  • How to dry everything out
  • What to throw away and what’s safe to keep
  • Restoring and replacing drywall and siding
  • Painting and caulking
  • Knowing when to hire professionals 

Without further ado, here’s everything you need to know about repairing water damage in Ottawa. 

Is it Clean, Gray, or Black Water? The Three Types of Water Damage


First things first, you need to determine which type of water has contaminated your home. 

If that sentence makes you scratch your head, you should know that not all water damage is the same. In particular, there are three types of water damage, each with varying degrees of severity. 

We didn’t just make this up, either. These are official rankings from the Institute of Inspection, Cleaning, and Restoration Certification (IICRC). They are:

  • Clean water
  • Gray water
  • Black water 

Each has unique requirements for how you approach repairs, so let’s take a closer look at them. 

Dealing with Clean Water Damage

The first and most accessible type of water damage to repair is from clean water – which is the least severe of the three, according to the IICRC. 

While it may seem nonsensical to refer to water flooding your home as ‘clean,’ it’s more about it being free of raw sewage and toxins, which will wreak even more havoc on your home and belongings.

Clean water comes from:

  • Busted pipes
  • Sinks
  • Water supply lines
  • Rain 

As you can see, these are all ‘clean’ sources of water that don’t contain excessive toxins or raw sewage. As such, this type of water is the easiest to dry up and repair without causing too much lasting damage. 

If you have clean water damage in Ottawa, you should be able to repair it by yourself relatively quickly. 

Of course, it will also depend on how much clean water damage your home has incurred. Repairs should be straightforward and pain-free if there’s only an inch or two of water on the ground. 

Dealing with Gray Water Damage 

Next on the IICRC severity scale is gray water – which is water that is slightly dirty or soiled – but not excessively. 

Gray water has more contaminants than clean water but still lacks raw sewage and severe contaminants. 

Gray water comes from:

  • Toilets
  • Washing machines
  • Sump pump backups
  • Dishwashers 

The waste and chemicals in gray water may or may not be directly harmful to humans, but it’s crucial to thoroughly disinfect your home to ensure the contaminants don’t cause problems down the line. 

You may also need to wear safety gear while repairing gray water damage to protect yourself from hazardous toxins (especially if the gray water came from a sump pump backup). 

At this point, you can still opt to handle the repairs yourself, but we recommend that you leave it to professionals like our team at RenosGroup. That’s because we’re well versed in cleaning/removing contaminated materials from bathrooms, kitchens, and basements to ensure that we restore your home to its original glory. 

Dealing with Black Water Damage 

Black water is the most severe on the IICRC scale, and for a good reason. Black water contains raw sewage and hazardous toxins that are extremely dangerous. 

You should by NO MEANS attempt to repair black water damage in Ottawa by yourself. 

That’s because black water can cause severe health complications if you aren’t wearing the proper safety gear/taking the necessary precautions. 

The last thing you want is to have to contend with a life-threatening illness while your home is flooded, which is why you should ALWAYS call us at RenosGroup to repair black water damage. 

How do you know if your home is contaminated with black water?

Here’s where black water comes from:

  • Sewers
  • Rising flood waters
  • Seawater
  • River water

If your home gets flooded by a sewer overflow or rising river waters, you need to contact professionals for cleanup as soon as possible. Black water contains bacteria, human waste, and other serious contaminants – so your home will need to undergo extensive disinfecting before returning to normal. 

Protect Your Home From Water Damage in Ottawa

Your Repair Guide for Water Damage in Ottawa


Now that you know about the three types of water damage, it’s time to learn how to repair damage from clean water and gray water. 

If you suspect the gray water has bacteria or contaminants in it, you should contact professionals for repairs. Yet, if it’s simply some water from a busted toilet, you should be able to handle it by yourself. 

Like anything else, there’s a right and wrong way to go about repairing water damage, which is why we’ve prepared this guide containing a step-by-step process for getting rid of water damage in Ottawa. 

Step #1: Inspect for Serious Issues

Your first step should be to assess the damage as thoroughly as possible. In particular, you need to keep your eyes open for severe issues like mold and mildew. 

What’s the difference?

In a nutshell, mildew forms on surfaces, and mold grows inside walls and dark places. So if you see a gray, white, or light brown growth around your home, it’s likely mildew. If there’s a growth inside your pipes or walls, it’s mold. 

Remember, mold and mildew can begin forming within 24 hours of incurring water damage. You need to assess the damage as soon as possible to stop them in their tracks. 

What do you do if you find mold or mildew?

Both are toxic and can be pretty dangerous to humans. If you notice severe mold/mildew in your home, your best bet is usually to call us to dispose of it safely and securely. You should also vacate the house and shut down the airflow (to avoid further contamination). 

For minor occurrences of mold/mildew, cut out the material it’s growing on, bag it, and dispose of it immediately. 

Step #2: Dry Everything Out 

Once you’ve completed a full assessment of the damage, it’s time to dry up all the moisture lingering in your home so you can return to normal. 

If you’re dealing with a small leak, you should be able to dry everything out by using heavy-duty fans. Not only will they expedite the drying process, but they’ll circulate the air in the affected area, which can help prevent foul odors. 

Your goal here should be to suck up every ounce of moisture left in the affected area. 

If your flooding is more on the severe side, you’ll need to rent a high-capacity dehumidifier to dry your carpet, wood, ceiling, and belongings. 

If you don’t feel like bothering with all that hassle, you can hire professionals like us to dry out your home. We have access to premium quality fans and dehumidifiers we can use to ensure we dry out every inch of your home. 

Step #3: Dispose of all Porous Materials 

Next, you’ll need to remove anything porous that got wet during the flooding. 

What are porous materials?

They contain tiny holes (like pores in your skin) that absorb moisture, dirt, and bacteria. Wet porous material can grow dangerous mold or mildew if left unchecked.

This may be a difficult step, as you likely won’t want to part ways with your carpet or specific pieces of furniture. 

Yet, it’s a necessary step, as water often permanently damages porous materials. For example, when wooden furniture gets wet (which is porous), it can permanently warp the wood – ruining it forever. 

That’s why it’s best to cut out wet porous materials and replace them. That includes carpet, fabric, insulation, wood furniture, and concrete. If you aren’t sure if something is porous or not, a quick Google search will let you know. It’s crucial to be vigilant here, as the last thing you want is to hold onto something porous that will grow harmful mold down the line. 

Step #4: Disinfect Everything You Keep 

Even the nonporous things you keep will need to go through disinfection to ensure they’re safe for your home. 

Water damage in Ottawa will affect everything it touches, which is why you must leave no stone unturned when repairing it. 

Why is disinfecting a necessary step?

It is because you never know when a few mold spores are left lingering on the floor or in a piece of furniture. All it takes is a few spores to start forming harmful mold that will be expensive to remove. 

That’s why you’ll want to disinfect everything with bleach (or a homemade solution) to completely wipe out all the bacteria, dirt, and mold spores. 

For clean water damage, lightly spraying the floor with a disinfecting agent and wiping it dry is all you’ll need to do. For gray water damage in Ottawa, you’ll need to go to more drastic measures when disinfecting the area. If you have black water damage, you should call us instead to avoid exposing yourself to harmful contaminants. 

Step #5: Repair Ceiling Panels First 

If your ceiling got wet from the water damage, it should be the first spot that you repair. That’s because ceilings are the most susceptible to sustaining structural damage due to gravity. 

Start by removing all ceiling panels that were affected by the leak. It would help if you also did some work to ascertain whether the leak originated from the roof or not. 

Important note: The leak from your roof may originate in a spot that’s far away from the actual water stain – so be thorough in your search. 

You should also check your beams and rafters to see if they got wet or incurred any damage from the leak. 

For any ceiling panel that got wet, throw it out and replace it with a new one. If your beams and rafters show signs of damage, you should contact us to repair them professionally. 

Step #6: Replace All Warped/Rotting Wood 

There’s no saving warped or rotted wood – so you’ll need to get rid of it all. Warped wood is not only ruined forever but can also form harmful mold inside, which can be detrimental to your health. 

Do your best to pry each wood panel apart so you can clean underneath it before replacing it. 

That’s because some excess moisture below the wood may cause problems down the line if you don’t clean it up now. 

If the wood in question plays an essential structural role in your home, you must be extra careful when pulling it out and replacing it. Your home’s structure relies on a precise balance of support, and you may disrupt that when ripping out structural wood. If you don’t want to be on the hook for expensive structural damage, leave the work to professionals like us. 

Step #7: Install New Flooring 

Water is particularly harsh on floors, as it can cause carpets to grow harmful mold and bacteria, and the moisture will swell and warp wooden floorboards. 

As such, the chances are high that you’ll need to replace your floors – or at least check underneath them to ensure the underlayment and padding don’t have any water damage (both can absorb moisture which will cause issues). 

The bright side is that this allows you to install waterproof flooring, which will protect you from water damage in the future. 

Popular waterproof flooring options include:

  • Ceramic tile
  • Porcelain tile
  • Vinyl planks
  • Sheet vinyl
  • Certain types of engineered wood
  • Polished concrete 

These are all adequate flooring options that are highly water-resistant, which will protect you should another leak/flood occur. To further protect your floors from water damage in Ottawa, you could opt for a protective sealant coating to waterproof the surface. 

Step #8: Replace Drywall and Siding

If any walls were affected by the water damage, you’ll need to either repair or replace the drywall. 

How do you know when a sheet of drywall is too far gone?

The rule of thumb is that if more than 3/8ths of an inch has swelled or sagged due to moisture – you should replace the entire sheet. Make sure to cut out the entire affected area and dry it out before installing fresh drywall. 

You can generally salvage the sheet if less than 3/8ths is affected. 

It would be best to inspect your external siding for water damage. If any water seeps behind your siding, it can cause permanent damage to the sensitive materials inside. 

If your siding has water damage, you’ll want to remove it as soon as possible to prevent rot from setting in underneath. Besides siding, moisture can also penetrate any faux stone surface, so it’s crucial to be as thorough as possible when inspecting the outside of your home for water damage in Ottawa. 

Step #9: Apply Fresh Paint and Caulk 

The final step is to either touch up or apply a fresh coat of paint to all the affected areas. That includes floors, walls, ceilings, and external siding. 

If the damage was minimal, you could get away with touching things up. If it was more extensive, you’re better off with a fresh coat. 

Once the painting is done, caulk all the materials (toilets, tile, etc.) to seal them and protect them from future water damage. 

Final Thoughts: Repairing Water Damage in Ottawa


Nobody wants to contend with water damage, but you never know when it will rear its ugly head. Luckily, this guide has your back should a leak or flood occur in your home. 

Remember to identify which type of water damage you have as the first step because if you’re dealing with black water – you need to call us at RenosGroup instead of attempting to repair the damage yourself. 

Our trained team of professionals has the know-how and top-tier equipment to make quick work of your water damage, no matter how severe it is. If you need water damage repair services or are renovating your home in Ottawa, don’t wait to reach out to us for a free in-home consultation at 613-727-9427.

Kitchen Remodeling in Ottawa: Cabinetry Guide

Whenever we consult with a client about kitchen remodeling in Ottawa, cabinetry is almost always the first subject that pops up, and it’s easy to see why.

Your cabinets are often the central focal point of your kitchen, as they’re what catches the eye first. That means the cabinetry you choose will make or break your kitchen depending on their quality, color, finish, and style.

The same is true for bathrooms, as well as basements that have guest rooms and kitchenettes.

Yet, there’s quite a bit to know when selecting cabinetry for your home. Hundreds of designs, styles, materials, and finishes exist.

You’ll also need to consider your budget and the overall feel you want your kitchen, basement, or bathroom to have.

Considering this, we’ve compiled this extensive purchasing guide for kitchen cabinets. That way, you’ll know exactly what to ask for when consulting with a kitchen contractor in Ottawa – including a realistic price range, so you don’t exceed your budget.

Stick around to learn everything you need to know about buying cabinets for your basement, bathroom, or kitchen remodeling in Ottawa.

The Different Types of Cabinets

First, it’s essential to familiarize yourself with the different types of cabinetry to determine your needs.

Regarding kitchens, the design typically consists of base cabinets, wall cabinets, and pantry cabinets.

The most popular bathroom options are Vanities, shaker-style, and louvered cabinets.

Basements tend to feature wall cabinets and ample storage cabinets – but they can also feature base cabinets and pantries if they have a kitchenette.

To discover what will work best for your renovation project, let’s take a more detailed look at each cabinet type.

Base Cabinets

Base cabinets serve two purposes; to provide storage space and to serve as a foundation for your kitchen’s countertop or sink.

For countertops featuring materials like granite or marble, base cabinetry needs extra reinforcement to provide proper support.

Kitchen sinks are also heavy and require a strong foundation, which is where base cabinets come into play. They hold up your sinks and countertops so you can work at standing height and provide convenient storage space for appliances, cleaning supplies, and more.

In particular, there are two types of base cabinets:

  • Sink base cabinets. These cabinets are specifically designed to support a kitchen sink – which is why they have an open back and a false drawer in front (it’s to work around your plumbing without drawing attention to it). They also provide storage space, and they come in a wide variety of colors and styles.
  • Corner cabinets. These are the cabinets that occupy the corners of your counter space. Several types of corner cabinets help you get the most out of your kitchen. Blind cabinets feature half a standard cabinet, with the other half being the corner of the adjacent cabinet. Lazy susan cabinets have rotating bases so you can easily access items in the back.

On average, base cabinets are around 24-inches deep with a few different options for width. Without a countertop, they average 34 inches in height. With a countertop, it jumps up to 35 to 36 inches.

Wall Cabinets

As the name implies, wall cabinets mount to the walls in your kitchen. Since they’re up high, these cabinets matter the most for visual appeal. They’re the focal point of the entire room, so it’s imperative to select the right style and material for them.

They come in various heights and widths, as some wall cabinets are shorter and hover over appliances like microwaves and refrigerators. Others are taller and typically reach up to 40″ inches in height.

Most wall cabinets feature adjustable shelves, with the height determining the number of shelves you can have.

Depending on the width of the cabinets, they can be a single door, double door, or even triple door if there’s enough room.

Like base cabinets, there are also corner wall cabinets – the most popular type being angled corner cabinets.

They’re typically 12-inches deep and 12 to 42-inches wide.

There are many ways that we can add visual flair to your wall cabinets through our Ottawa kitchen remodeling, such as:

  • LED lighting arrangements
  • Artistic glass inserts
  • Decorative framing and door designs

It’s also possible to raise or lower wall cabinets for accessibility reasons.

Pantry Cabinets for Ottawa Kitchen Remodeling

Pantries start at the floor and are usually quite tall. Typical heights range from 84-inches to 96-inches, with widths ranging from 12 to 36-inches.

Besides serving as a pantry, these tall cabinets also work as a way to house wall ovens and refrigeration units.

Yet, the most common use is as a pantry, and they usually have two doors and up to three adjustable shelves. A pantry is necessary for any Ottawa kitchen remodel, as you want plenty of room to store all your non-perishable (and perishable) food items.

Without one, you likely won’t have enough storage space for all your food, which leads to unsightly clutter (such as cereal boxes stacked on top of the fridge).

It’s common for pantries to have top and bottom sections. The top has three adjustable shelves, and the bottom is either open or has more storage options like pull out shelves.

Shaker-Style Cabinets

In our experience with Ottawa kitchen remodeling, shaker-style cabinets are among the most popular for both kitchens and bathrooms.

They provide a timeless appeal that never goes out of style and work great for achieving the farmhouse kitchen look.

A shaker-style cabinet features five components:

  • Two stiles
  • Two rails
  • A recessed panel in the middle

Shakers mix well with glass inserts, and it’s easy to spruce them up with millwork to add some visual flair.

Glass-Front Cabinets

Do you want to add ritz and sophistication to your kitchen cabinetry?

If so, there’s no better way than by adding glass-front cabinets. They’re popular for wall cabinets, base cabinets, and cabinets under kitchen islands.

While you probably don’t want to use glass-front cabinets for every cabinet, it looks stylish to mix and match.

In particular, glass-front cabinets work well if you want to display something, such as prized bottles of liquor or wine or expensive china.

Glass cabinets are also more effective at keeping your valuables safe from grime, dust, grease, and dirt. Another perk is that they will reflect the ambient light in the room, brightening everything up. That means you won’t have to turn on as many lights in your kitchen, which will help save money on your energy bill.

To add a little extra pizazz, you can add window films that can turn the glass into different colors or add stunning etched patterns.

White Cabinets

White cabinets are the preferred choice for homeowners after the all-white farmhouse kitchen look. White cabinets are timeless, as white transcends all trends.

Why is that?

It’s because white as a color works great as a backdrop for other hues, themes, and styles.

As such, white cabinets are a safe option if you want to have the freedom and flexibility to renovate again in the near future. If you decide to try out a new color scheme for your kitchen, you can keep the white cabinets the same, and they’ll look fine.

Kitchen Remodeling in Ottawa: Cabinetry Guide

Kitchen Remodeling in Ottawa: Cabinetry Guide

Cabinet Materials

Equally as important as the type of cabinet you choose is its material. Cheaper cabinets use poor materials, such as flimsy, low-grade particle boards that won’t last very long.

Besides poor materials, you should keep an eye out for:

  • Staples
  • Notched butt joints
  • Corner gussets and braces made of plastic
  • Thin panels
  • Cheap glue, screws, and nails

These are all tell-tale signs that the cabinet is of poor quality. You get what you pay for when it comes to cabinets, so it’s crucial to include enough in your budget for high-quality cabinets with durable materials.

Which materials work best for cabinets?

There are quite a few, so let’s take a look at each one.

Moisture-Resistant, High-Grade Particle Board

While particle board has a bad reputation, and primarily for a good reason, it’s not entirely useless. Like other materials, there are grades of particle board, and higher grades are more durable and resilient.

Besides being high-grade, the particle board also needs to be moisture-resistant.

Why’s that?

It’s because of how particle board reacts to getting wet. When exposed to moisture, standard particle board will expand and fall apart. That means if your particle board cabinets get wet, they’re essentially done for. Moisture-resistant particle board doesn’t have this problem, so it’s what you want.

Yet, even high-grade particle board still has a lot of issues when used in cabinets, such as:

  • It doesn’t take fasteners well
  • It doesn’t respond well to glue
  • It’s hard to perform joinery techniques

For these reasons, it’s best to avoid particle board if you have the budget.


Plywood is one of the most commonly requested materials in our experience with kitchen remodeling in Ottawa.

That’s because it’s affordable yet doesn’t struggle with the same issues as particle board.

It’s a stable building material that’s perfect for cabinets because of how well it responds to glue, fasteners, and joinery techniques. Plywood is constructed by gluing together thin layers of wood veneer.

You’ll want to ensure that the plywood you use is finished on both sides. Typically, plywood is only finished on one side, which makes it vulnerable to absorbing moisture on the unfinished side. As long as both sides are finished, you won’t have problems with your cabinets absorbing moisture.

Medium-Density Fibreboard/Combi Core

Medium-density fibreboard (MDF) is a manufactured wood product constructed from broken down hardwood and softwood fibers.

It’s stronger than particle board and plywood, and it’s the most stable option out of any material.

Yet, MDF has the same moisture issues that plywood and particle board both have. It will easily absorb moisture and begin to warp if it’s unprotected.

The good news is that there’s waterproof MDF on the market. In fact, modern forms of MDF are so waterproof that you can soak them in water for DAYS with no warping effects.

Combi Core is another resilient option that features layers of wood veneers and two thin layers of MDF.

Both materials are excellent for cabinets; just ensure you get the moisture-resistant versions.

High-Density Fibreboard

If durability is a critical factor for your cabinets, it’s worth springing for high-density fibreboard (HDF).

It’s the king of durable cabinet materials and stronger than MDF by a considerable margin. It also contains a lot of resin, which makes it even more durable.

If you expect your cabinets to see quite a bit of wear and tear, HDF is your best bet if you want your cabinets to have a long lifespan.

What’s the Difference Between Framed and Frameless Cabinets?

When browsing Ottawa kitchen remodeling websites for cabinetry, you may have noticed the option for framed or frameless cabinets.

What’s the difference?

It refers to how they’re constructed, how they look, and the design options available.

  • Framed cabinets have an overlay or ‘frame’ attached to the front side of the cabinet. Typically, the frames lay up to 2-inches over the top of the counter box. The frame adds strength and stability to the construction and provides a decorative look. 
  • Frameless cabinets do not have a frame but, instead, have a sleek and seamless look. They often have drawer slides to make them easier to open. Frameless cabinets are also called European cabinets because they originated and became popular in Europe.  Frameless cabinets are the most popular option for kitchen remodeling in Ottawa.

It’s up to your personal preference whether you choose framed or frameless cabinets for your home – as it’s entirely subjective. Both construction methods are entirely equal, so one isn’t objectively better than the other.

Instead, you’ll have to determine whether you want a frame or not entirely based on the way it looks with your existing theme.

If you’re a fan of the minimalist style, you’ll probably enjoy frameless cabinets. Conversely, if you’re after the all-white farmhouse feel, you’ll want to use framed shaker-style cabinets.

Selecting a Door Design

You’ll have several options available for your cabinet door designs:

  • Raised panel doors. These cabinets feature a raised panel in the center, hence the name. They work for both traditional and modern kitchens, so we get a lot of requests for them as kitchen contractors in Ottawa.
  • Cathedral doors. Similar to a raised or recessed panel door, a cathedral or arch door has a rounded arch at the top of the middle panel.
  • Shaker doors. Shaker-style cabinets feature flat panels surrounded by a frame of rails and stiles.
  • Beaded panel doors (Beadboard). These doors have inset panels that mimic planks separated by ridges.
  • Slab doors. This cabinet door style is entirely flat and has no raised or recessed features. It works best if you’re after a modern feel and are using frameless cabinets.
  • Louvered doors. In the past these were popular for bathrooms, louvered cabinet doors have vertical frames with horizontal slats running between them.

As with framed and frameless cabinets, this choice is purely visual and subjective. There’s no advantage or disadvantage to any construction technique, so you can make a decision based entirely on personal taste.

Colors and Finishes

Whenever we do free in-home consultations for clients on kitchen remodeling in Ottawa, we’re always sure to mention the colors and finishes that we have available.

That’s because these two details are easy to forget when you’re in a hurry to remodel your kitchen. Yet, they’re two more ways that you can further customize and personalize your cabinets to reflect the exact look that you want.

As far as colors, you have the entire rainbow at your disposal, so it can seem a bit daunting with all the options.

Here are some professional tips on how to select a color for your cabinets:

  • Consider the overall color scheme of your kitchen.
  • If your kitchen is too dark and you want to add more light, using the color white will naturally reflect more ambient light.
  • Don’t forget to factor in your personal preferences. If a color is a little loud or clashes with your overall theme, you can still use it if you like it – as the choice is ultimately yours.

You also need to consider which cabinet finish you want for your Ottawa kitchen remodel.

Finish Types

Unfinished cabinets don’t feature any painting, varnishing, or staining. The material gets left in its natural state, which provides the casual, rustic look that some homeowners enjoy. That’s especially true for unfinished wooden cabinets.

If you want your cabinets to appear polished and refined, you should opt to have them stained. Spray-on stains provide a uniform finish, while hand-applied stains have more of a varied color effect. Both are available for our kitchen remodels in Ottawa.

Painted cabinets will provide the most options for colors. Yet, a painted cabinet with a matte finish will require more maintenance than a stained one. That is, unless you go with a semi-gloss or satin paint finish, as they’re easier to keep clean.

Final Thoughts: Purchasing Cabinets for Kitchen Remodeling in Ottawa

If you’re remodeling your kitchen in Ottawa, you should have a better idea of what your cabinetry needs are now.

Whether you’re remodeling your kitchen, basement, or bathrooms, cabinets play a central role in the room’s color scheme, style, and layout. That’s not to mention the practical value they add via the storage space they provide.

If you need a basement, kitchen, or bathroom contractor in Ottawa, don’t wait to reach out to us at RenosGroup.

Unlike other contractors in the area, we offer totally free in-home consultations for all our new clients. Our #1 goal is to provide you with the most accurate estimates and plans for your remodel so it turns out exactly the way you want. To schedule a consultation today, complete our online form or you can give us a call at (613) 727-9427.

An Extensive Guide to Carpentry in Ottawa

If you want to renovate your home, the chances are high you’ll need to find skilled carpentry in Ottawa.   Carpenters are involved in everything from building custom cabinets to doors and window frames.

If you’re seeking quality renovations, you’ll need to know a bit about the basics of carpentry.

This knowledge will help you find and hire the best contractor in your area (as well as the right specialty.)

It may not seem like there’s much to it. Yet, carpentry is an expansive field that’s as old as time. You’ll need to know about carpentry’s essential skills, specialties, and training. That’ll help narrow down the search when looking for a carpenter in Ottawa. If you don’t take it seriously and hire a cheap/unskilled carpenter – your results will look less than stellar. 

That’s why it’s worth learning more about carpentry to ensure your renovations come out looking fantastic. Finding a skilled carpenter will also help you save money in the long run since you won’t have to pay for expensive repairs to fix mistakes. 

Here’s an example of what we mean, does your project need a farmworker, framer, or cabinet maker? If you aren’t sure, you’ll need to do a little homework first to avoid wasting your money. Luckily, we’ve prepared this handy carpentry guide to fill you in on everything.

Nailing the Basics: What is Carpentry? 

Let’s begin with a plain English definition of carpentry. It’s the art of working with wood to construct buildings, frames, and other objects. Woodworking and joinery also fall under the umbrella of carpentry. Here’s a breakdown of their subtle differences:

  • Carpentry is a trade that strictly uses wood for construction. It primarily refers to the construction of buildings with timber.
  • Woodworking is the craft side of carpentry, such as constructing cabinets and furniture.
  • Joinery is constructing frames and panels by creating and installing fittings.

There are carpenters, woodworkers, and joiners to go along with these crafts. (That’s not to mention the different specialties within each, but more on that later.)

Let’s consider a few examples to make things easier to understand. In example #1, you need a professional to construct a custom nightstand for you. 

Would you need:

A.) A carpenter

B.) A woodworker

C.) A joiner

If you guessed B.), you’re correct. Woodworkers specialize in handcrafting furniture, cabinets, and other wooden objects. As such, if you want a custom nightstand, you need to call a talented woodworker. A joiner or a carpenter won’t have the necessary skills – unless they moonlight as a woodworker. 

In example #2, you need someone to construct an entire shed in your backyard. 

Would you need:

A.) A carpenter

B.) A woodworker

C.) A joiner

In this scenario, A.) is the correct choice. A carpenter will have the skills and wherewithal to construct the entire shed on-site. A woodworker lacks the know-how to build a building from scratch. Instead, they focus on creating objects and furniture. 

All right, in example #3, you need someone to build a new window frame for you. 

Would you need:

A.) A carpenter

B.) A woodworker

C.) A joiner

The answer is C.), as a joiner constructs frames, doors, and other joinings. They tend to work isolated in their shops and don’t work on location. 

By now – you should have a better understanding of the difference between the three crafts. While they’re all technically forms of carpentry – there are tiny differences – as these examples have shown.

Carpentry in Ottawa - Basement Framing in Orleans

Carpentry in Ottawa – Basement Framing in Orleans

The Different Types of Carpentry 

Within carpentry, there are various styles and specialties. In particular, there are two primary types of carpentry that we’ll focus on in this section. They are rough carpentry and finish carpentry. Here’s a detailed breakdown of both. 

Rough Carpentry 

If the carpentry work doesn’t need a brilliant finish, there’s no need to waste time and money applying one. For instance, if walls and paint hide the carpentry work – a rough job will suffice. This type of work is rough carpentry, and it’s more about doing quality work than making it look pretty. 

Most of the time, rough carpentry refers to structural work. Structural carpenters erect rafters, posts, and beams for a new building. With this type of work, efficiency and sturdiness are what matter most. There’s no need to make the rafters and beams aesthetically pleasing – as no one will see them. 

Rough carpenters find lots of work in roofing and framing new buildings. A structural carpenter puts together the skeleton of a building. They also have to pay close attention to safety codes and regulations. Remember, if you’re after a visually pleasing job, you don’t need a rough or structural carpenter. You will need one if you’re constructing a new building and need a solid foundation for it.

Finish Carpentry 

A finish carpenter is the polar opposite of a structural carpenter. Finish carpentry is all the work that will be visible once a building gets completed. That’s why finish carpenters put a lot more effort into making their work look excellent. 

Finish carpenters boast great attention to detail. They install trim, molding, decks, staircases, and so much more. 

If you want a carpenter to build an elegant staircase with a stunning finish – you need a finish carpenter. They will go to great efforts to make their work look outstanding. 

For constructing a new building, you’ll need rough carpenters and finish carpenters. The rough carpenters knock out the foundation, while the finish carpenters make it look pretty. You’ll want to hire both if you’re constructing a building from scratch.

Trim Carpentry 

Is your Ottawa home in need of a new fireplace mantle? If so, you’ll want to give a trim carpenter a call. They specialize in creating wood trims and moldings for homes. That includes fireplace mantles, ornamental trim, skirting boards, and so much more. Other types of carpenters may not be as familiar with installing trim, so it’s best to use a trim carpenter.

Green Carpentry 

Have you seen someone advertising ‘green’ carpentry services? That refers to carpenters that use eco-friendly methods and materials. If you’re someone that’s highly environmentally conscious, you’ll want a green carpenter. They will perform the same tasks as any other carpenter but in a sustainable way.

Scenic Carpentry 

Do you need someone savvy enough to create wooden sets for a high school play? Then it’s time to hit the yellow pages (or Google) for a scenic carpenter in Ottawa. These are carpenters that specialize in constructing and dismantling sets for stage and screen. 

As you can see, there are many types of carpentry. It’s essential to consider the kind of expertise you’ll need with your carpentry job. 

For example, do you need rough or finished work done? Do you want your carpenter to use sustainable materials? Are you thinking about installing a new skirt board? 

Once you know what type of work you need, you should look for a carpenter that specializes in it. That’s the most reliable way to ensure that the job gets done right the first time.

Carpentry 101: Basic Carpentry Skills to Know

Before any carpenter can tackle complicated work, they need to master the basics. If you don’t know basic carpentry skills yourself, you won’t be able to tell apart a master from a novice. That’s why it’s worth familiarizing yourself with the essentials. You never know; it may lead to you taking up carpentry as a side hobby. 

Safety First! 

By far, the most crucial aspect of carpentry is doing it safely. There are countless hazards to contend with when working with wood, and some aren’t entirely obvious. For example, keeping your work area tidy is the best way to avoid trip hazards. It may not seem like it, but there are many ways to trip and fall when doing carpentry. 

When hiring carpenters, pay attention to their reviews

Do they work carefully and safely? If not, it’s best to find carpenters who follow health and safety regulations

That’s best for the health of the carpenter and the integrity of your home. If a carpenter does a haphazard job, they may do severe damage to your house. 

Wearing proper safety gear is also a must for any type of carpentry work. You’ll want to wear goggles, gloves, steel boots, and a hard hat. Make sure that any carpenter you hire takes safety seriously and follows the best practices. 

Measure Twice, Cut Once

A tape measure is a carpenter’s best friend – but it can also be their worst enemy. Taking precise measurements is a core component of all types of carpentry. If a carpenter takes off measurements – their work will suffer as a result. An ideal carpenter is one that double or triple checks each measurement. 

Being as accurate as possible with measurements leads to flawless work and saved money on materials. If you mess up a measurement and cut the material incorrectly, you’ve wasted money. That’s why accurate measurements are so crucial to carpentry.

Be the Jack of All Tools 

Carpentry work is very tool-intensive. Carpenters use everything from pen and paper to saws, power tools, and more. Beyond knowing how to use a tool, it’s also essential to know when to use them. Strive to hire carpenters that really know their way around their tools. 

Let the Saw Do the Cutting 

Lastly, an accurate measurement won’t mean anything if you can’t cut straight. An often-repeated phrase on job sites is ‘let the saw do the cutting.’ If you notice that your hands/arms are growing tired – you’re pushing too hard. That will increase the chances of wandering off course and making an uneven cut. Lay off the pressure, relax, and let the saw do the work for you.

Hiring a Carpenter in Ottawa

Since you know more about the trade of carpentry, now you’re better equipped to find a carpenter. There are a few qualifications to look out for when searching for carpenters. You’ll want to hire someone with the necessary education, training, and experience. Here are the top things to look for when searching for a local carpenter.

Adequate Training

You don’t need a college degree to become a carpenter. Instead, apprenticeships are how the trade passes from one generation to another. Apprenticeships happen in many places, including trade schools, shop classes, and on the job.

After the apprenticeship is complete, the carpenter is now a journeyman. However, to become an official journeyman, they’ll need to complete a test. It’s given by the United Brotherhood of Carpenters and Joiners of America.

They’ll have to work as a journeyman for a period of years after passing the test. After roughly 10 – 15 years in the field, they earn the title of a master carpenter. That means they can tackle just about any carpentry job with a reasonable skill level. Master carpenters will charge more than journeyman carpenters. Yet, it’s crucial to remember that the title of master carpenter is an informal one.


You should never hire a contractor that doesn’t have a license. As stated above, even if the carpenter is a ‘master carpenter,’ that’s an informal title, so they still need a license. In some states, hiring a carpenter without a license is illegal.

A license means that the carpenter is up-to-date on industry standards and has liability insurance. Those are two things that you want from any carpenter – which is why a license is a must.


If a carpenter doesn’t have liability insurance – you’ll be on the hook for any damage they do to your home. That can spell disaster if you hire a carpenter that doesn’t have much experience. To save yourself from this headache, always ensure the carpenter has liability insurance.

That’s not the only form of insurance they should have, though. You’ll also want to make sure they have worker’s compensation insurance. That will save you from covering their medical bills if the carpenter has an accident on the job. Lastly, you’ll want the carpenter you hire to have a bond. That will protect you if they fail to meet the terms of your contract.

Summarizing Thoughts

We’ve covered a lot so far, so let’s recap. Carpentry is an extensive trade that houses many specialties and crafts. There are many types of carpentry, such as rough and finished carpentry. When looking for a carpenter, try to find one that has excellent reviews, fair prices, licensing, and insurance.

If you want to make things easy on yourself, you can use us at Renos Group. We’re home to licensed, skilled, and experienced carpenters that will do a fantastic job on your renovations. If you’re interested, feel free to reach out for a free in-home consultation or give us a call at (613)724-9427

Scroll to top